# Problema metadati vecchio nas

**URL:** <https://forums.plex.tv/t/problema-metadati-vecchio-nas/219361>\
**Category:** Italiano - Italian\
**Created:** [December 28, 2017, 7:51pm UTC](https://forums.plex.tv/t/problema-metadati-vecchio-nas/219361 "2017-12-28T19:51:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![serjo77](https://avatars.discourse-cdn.com/v4/letter/s/e9c0ed/32.png) [@serjo77](https://forums.plex.tv/u/serjo77)\
**Post date:** [December 28, 2017, 7:51pm UTC](https://forums.plex.tv/t/problema-metadati-vecchio-nas/219361/1 "2017-12-28T19:51:22Z")

</div>

Salve a tutti,  
da qualche mese non riesco più a scaricare i metadati dei film presenti sul mio nas (qnap ts 212p)  
da quanto ho capito dovrebbe essere l’architettura dell’hardware troppo vecchia,  
le nuove versioni di plex non vengono più rilasciate e sono costretto ad utilizzare la Versione 0.9.15.3  
Mi confermate ciò? è possibile porre rimedio anche in parte o sono costretto ad abbandonare il mio vecchio nas?  
Grazie a tutti.

---

<div class="post-metadata">

**Author:** ![usulbz](https://avatars.discourse-cdn.com/v4/letter/u/7ab992/32.png) [@usulbz](https://forums.plex.tv/u/usulbz)\
**Post date:** [December 29, 2017, 10:41am UTC](https://forums.plex.tv/t/problema-metadati-vecchio-nas/219361/2 "2017-12-29T10:41:07Z")

</div>

Leggendo brevemente i vari forum, ho recuperato queste informazioni:

Your QNAP TS-212P is sadly a very low-end NAS, with not much CPU power, so if going to run Plex on that, you’ll have to remember the following:

```
When ever you do some changes within Plex, like adding new medias etc. it's going to take a long time
    As such, you must wait, and then wait a bit more before starting to use Plex
Since your QNAP comes with an ARM-based CPU, it does not allow for transcoding, meaning that if a media you wants to play on a device is not compatible, then it'll not work
    As such, you'll have to check what the formats/req. of your individual devices/players are needed/supported, and manually change your medias into that

```

When above is said, you can find the Un-Official not supported Plex server for QNAP Arm based devices here:

[https://forums.plexapp.com/index.php/topic/56426-download-unofficial-plex-qnap-arm-packages-here/?p=337430](https://forums.plexapp.com/index.php/topic/56426-download-unofficial-plex-qnap-arm-packages-here/?p=337430)

Quindi confermo che il nas in tuo possesso e’ ormai obsoleto.

---

<div class="post-metadata">

**Author:** ![serjo77](https://avatars.discourse-cdn.com/v4/letter/s/e9c0ed/32.png) [@serjo77](https://forums.plex.tv/u/serjo77)\
**Post date:** [December 29, 2017, 12:02pm UTC](https://forums.plex.tv/t/problema-metadati-vecchio-nas/219361/3 "2017-12-29T12:02:19Z")

</div>

Il problema della transodifica era nota sin dall’inizio, difatti veniva utilizzato solo in locale, ma il problema dei metadati pensavo si potesse porre rimedio…

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/plex/original/3X/2/a/2acb9765406f63293d357b4ec509ec39aa28f2ad.png) [@system](https://forums.plex.tv/u/system)\
**Post date:** [January 8, 2020, 8:19pm UTC](https://forums.plex.tv/t/problema-metadati-vecchio-nas/219361/4 "2020-01-08T20:19:48Z")

</div>