# Remote Access Not working

**URL:** <https://forums.plex.tv/t/remote-access-not-working/946009>\
**Category:** Remote Access\
**Tags:** server-windows\
**Created:** [November 15, 2026, 7:28pm UTC](https://forums.plex.tv/t/remote-access-not-working/946009 "2026-11-15T19:28:36Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![adumb\_p](https://avatars.discourse-cdn.com/v4/letter/a/67e7ee/32.png) [@adumb\_p](https://forums.plex.tv/u/adumb_p)\
**Post date:** [November 15, 2026, 7:28pm UTC](https://forums.plex.tv/t/remote-access-not-working/946009/1 "2026-11-15T19:28:36Z")

</div>

Server Version#: 1.43.5.11079-b3b13e506  
Player Version#: Plex for WIndows 1.115.0.426-4e960a1d

It was working totally fine until recently. No changes were made on my end. Not on a VPN at home, my DNS on all my devices including server is set to google (8.8.8.8). Tried restarting router, checking port forwarding, stop plex server and redownload certv2 file. My server itself shows that remote access is available but none of my clients connect. Sometimes they do but indirectly with conversion, and sometimes when they try to play directly it takes minutes to try to load only for me to get an unknown error: 4294967283. Log file attached. Thanks!

[Plex Media Server Logs\_2026-11-15\_13-21-45.zip](https://forums.plex.tv/uploads/short-url/wmrzcMp2j3T8Dh6kYg982ANRgQQ.zip) (3.3 MB)

---

<div class="post-metadata">

**Author:** ![veeejay](https://avatars.discourse-cdn.com/v4/letter/v/9dc877/32.png) [@veeejay](https://forums.plex.tv/u/veeejay)\
**Post date:** [November 15, 2026, 7:48pm UTC](https://forums.plex.tv/t/remote-access-not-working/946009/2 "2026-11-15T19:48:09Z")

</div>

Have you signed out and back in on the clients that aren’t working to ensure they pick up/refresh any changes you’ve made to the cert and/or port forwarding rules?

Assume you’re manually forwarding and not relying on UPnP?

In your plex network setting also uncheck “enable relay” so clients can’t connect indirectly.

---

<div class="post-metadata">

**Author:** ![veeejay](https://avatars.discourse-cdn.com/v4/letter/v/9dc877/32.png) [@veeejay](https://forums.plex.tv/u/veeejay)\
**Post date:** [November 15, 2026, 7:53pm UTC](https://forums.plex.tv/t/remote-access-not-working/946009/3 "2026-11-15T19:53:12Z")

</div>

Just looked at your logs…based on your IP, are you on AT&T? Do you have a BGW620?

Is the issue right now that local clients aren’t connecting, or is it remote clients (outside your home) that aren’t connecting?

---

<div class="post-metadata">

**Author:** ![adumb\_p](https://avatars.discourse-cdn.com/v4/letter/a/67e7ee/32.png) [@adumb\_p](https://forums.plex.tv/u/adumb_p)\
**Post date:** [November 15, 2026, 7:54pm UTC](https://forums.plex.tv/t/remote-access-not-working/946009/4 "2026-11-15T19:54:45Z")

</div>

Enable Relay is now disabled. I signed out of the windows client and back in. I already had cert-v2.p12 so I didnt need to redownload that. Manual port forward since my router doesnt have UPnP. Host port 32400 with a global port range of TCP above 45000. My server has an allocated static IP as well. Still same issue. My server shows remote access green but my client shows remote access available for like 20 seconds then goes back red. Same unknown error code when trying to play anything.

---

<div class="post-metadata">

**Author:** ![veeejay](https://avatars.discourse-cdn.com/v4/letter/v/9dc877/32.png) [@veeejay](https://forums.plex.tv/u/veeejay)\
**Post date:** [November 15, 2026, 8:00pm UTC](https://forums.plex.tv/t/remote-access-not-working/946009/5 "2026-11-15T20:00:32Z")

</div>

In addition to the earlier questions…can you screenshot the remote access page in plex and share a screenshot of your port forwarding rule?

What does this say for your port: [https://canyouseeme.org/](https://canyouseeme.org/)?

You mention setting a port above 45000, but logs show 32400 or 32420 as the port you have set in plex.

> [@adumb\_p](#):
>
> My server shows remote access green but my client shows remote access available for like 20 seconds then goes back red.

If you’re referring to the Remote Access page in Plex, this is how the page behaves when it’s testing remote access. It will show green and then flip back to red when it’s not configured or reachable.

---

<div class="post-metadata">

**Author:** ![adumb\_p](https://avatars.discourse-cdn.com/v4/letter/a/67e7ee/32.png) [@adumb\_p](https://forums.plex.tv/u/adumb_p)\
**Post date:** [November 15, 2026, 8:27pm UTC](https://forums.plex.tv/t/remote-access-not-working/946009/6 "2026-11-15T20:27:11Z")

</div>

Ive attached the requested images. I was referring to the remote access page from within my client. In PMS it stays green and is fine, but when i try to connect in client it’ll show working for a bit, but then change back to red.

also canyouseeme shows my port 45420 is open successfully.

![Screenshot 2026-11-15 142445](https://global.discourse-cdn.com/plex/original/4X/f/0/1/f01c4dc86a1b4441917c67e7f681399a05897c59.png)

 ![Screenshot 2026-11-15 142527](https://global.discourse-cdn.com/plex/original/4X/0/d/6/0d6e9cd4bd4e1d4a63d5317b3b5581d521e119d4.png)

Sorry I had changed the port after downloading logs and forgot to grab the new ones. The newly attached should reflect the port change sorry!

[Plex Media Server Logs\_2026-11-15\_14-32-44.zip](https://forums.plex.tv/uploads/short-url/veMYlVc6E2Q1OVZjluoxkmYbFqX.zip) (2.4 MB)

---

<div class="post-metadata">

**Author:** ![veeejay](https://avatars.discourse-cdn.com/v4/letter/v/9dc877/32.png) [@veeejay](https://forums.plex.tv/u/veeejay)\
**Post date:** [November 15, 2026, 8:34pm UTC](https://forums.plex.tv/t/remote-access-not-working/946009/7 "2026-11-15T20:34:28Z")

</div>

Can you clarify if this is actually remote access you are trying to troubleshoot or local connections on your network? I’ve had some folks refer to connections not on the local server, in their own home, as remote, so just checking.

There’s an issue with the BGW620, so trying to see if it’s the same issue. Basically if you have a port forward and remote access enabled, local devices won’t connect. Some have sporadic success, but it is causing issues.

Off your network, if you try to reach `http://<public-ip>:45420/web` does it connect to your server? It doesn’t resolve for me, which points to the same gateway issue..but not 100% since would need you to confirm. The issue started about a week ago, so would line up to when you started having issues.

Odd that 45420 doesn’t show in your logs as a port you had set when you grabbed the logs. I’m not great with logs, so maybe I’m missing it. Did you change it since you grabbed them?

---

<div class="post-metadata">

**Author:** ![adumb\_p](https://avatars.discourse-cdn.com/v4/letter/a/67e7ee/32.png) [@adumb\_p](https://forums.plex.tv/u/adumb_p)\
**Post date:** [November 15, 2026, 8:42pm UTC](https://forums.plex.tv/t/remote-access-not-working/946009/8 "2026-11-15T20:42:01Z")

</div>

This is indeed remote access. Everything been setup exactly the same for years with no changes and had no issues until about a week or two ago. I edited my previous reply with the new logs since changing the port that was my bad.

I tried to access the public-ip:port/web on my phone while disconnected from local network and it just keeps saying connection reset. So I’m guessing its an issue specific to my modem/router then? But the timeline certainly lines up it’s been happening for like a week.

---

<div class="post-metadata">

**Author:** ![veeejay](https://avatars.discourse-cdn.com/v4/letter/v/9dc877/32.png) [@veeejay](https://forums.plex.tv/u/veeejay)\
**Post date:** [November 15, 2026, 8:45pm UTC](https://forums.plex.tv/t/remote-access-not-working/946009/9 "2026-11-15T20:45:23Z")

</div>

Going to assume it’s a similar issue then…usually it only works locally or only remotely when a port is forwarded. But you seem to be having a slightly different experience.

Best solution right now is to get your own router and put the att into passthrough. Here’s a comment I left on another post with links to similar issues. The last one is to a post on the att fiber sub Reddit where someone noted they reported it to AT&T, but not sure what will come of that..

> [@Remote access works, locally not so much](https://forums.plex.tv/t/remote-access-works-locally-not-so-much/945874/4):
>
> There’s a bug that’s popped up in the last week with the gateway. It behaves as you described. Local works if remote access is disabled/port is closed, but when enabled only remote works. Some links to others having the issue are below. Workaround currently is to put the gateway into passthrough and get your own router. One person in the links below got a replacement gateway and it fixed the issue, but it will likely get an updated firmware that will break it again. One person submitted a repo…

---

<div class="post-metadata">

**Author:** ![adumb\_p](https://avatars.discourse-cdn.com/v4/letter/a/67e7ee/32.png) [@adumb\_p](https://forums.plex.tv/u/adumb_p)\
**Post date:** [November 15, 2026, 8:47pm UTC](https://forums.plex.tv/t/remote-access-not-working/946009/10 "2026-11-15T20:47:23Z")

</div>

Gotcha. Had a feeling it was something to do with ATT cause it was strange how it happened suddenly. Thanks veejay! Looks like I’m getting a new router.
