# Remote access unavailable
**URL:** https://forums.plex.tv/t/remote-access-unavailable/925398
**Category:** Plex Media Server
**Tags:** server-windows
**Created:** [July 8, 2025, 10:06pm UTC](https://forums.plex.tv/t/remote-access-unavailable/925398 "2025-07-08T22:06:41Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@ServerFCA](https://forums.plex.tv/u/ServerFCA)
#### Post date: [July 8, 2025, 10:06pm UTC](https://forums.plex.tv/t/remote-access-unavailable/925398/1 "2025-07-08T22:06:41Z")
I’ve read the Troubleshooting Remote Access page and I’ve tried everything but I just can’t get Plex remote access to work.
- I disabled antivirus, Windows Defender firewall and also router firewall;
- I tried both static and automatic IP`on the server;
- On router, I activated the UPNP option and forwarded the port using 32400.
The result is always the same: initially shows up the message “fully accessible outside your network”, but then after 5 seconds it changes to “not available outside your network”.
I checked the public IP and Plex got it right.
The port forwarding configuration on the router is as shown below:
In protocol, I tried both TCP and UDP.
I`ve spent hours on this and just can`t find any solution. What else can I do to solve this?
---
### Author:  [@tom80H](https://forums.plex.tv/u/tom80H)
#### Post date: [July 8, 2025, 11:13pm UTC](https://forums.plex.tv/t/remote-access-unavailable/925398/2 "2025-07-08T23:13:52Z")
> [@ServerFCA](#):
>
> On router, I activated the UPNP option and forwarded the port using 32400.
There’s no reason to keep UPNP activated if you go with a manual port forward (unless you need it for some other service).
#
> [@ServerFCA](#):
>
> The result is always the same: initially shows up the message “fully accessible outside your network”, but then after 5 seconds it changes to “not available outside your network”.
That basically means it’s not working.
Plex keeps the “positive” status while running the remote access connectivity check and only switches it once it’s confirmed not to work.
#
> [@ServerFCA](#):
>
> In protocol, I tried both TCP and UDP.
Plex only needs TCP.
#
As for troubleshooting…
1. Can you access/see the forwarded port from outside your home network (e.g. using a service like [canyouseeme.org](http://canyouseeme.org))?
2. Does the public IP recognized by [canyouseeme.org](http://canyouseeme.org) match your router’s WAN IP (public IP) and the public IP listed on your PMS’s remote access settings?
#
> [@The Basics of Remote Access Troubleshooting](https://forums.plex.tv/t/the-basics-of-remote-access-troubleshooting/769517):
>
> When it comes to remote access, there’s a lot of different factors which can impact your setup. Some are under your own control, others not so much. First off… there’s a dedicated [support article on troubleshooting your remote access](https://support.plex.tv/articles/200931138-troubleshooting-remote-access/). I strongly recommend you have a look at that. Find below some additional remarks on how to troubleshoot your remote access setup. Review your internet access / remote access configuration It’s good practice to review if Plex gets the correct public IP address…
---
### Author:  [@ServerFCA](https://forums.plex.tv/u/ServerFCA)
#### Post date: [July 9, 2025, 2:28am UTC](https://forums.plex.tv/t/remote-access-unavailable/925398/3 "2025-07-09T02:28:30Z")
> [@tom80H](#):
>
> -
> 1. Can you access/see the forwarded port from outside your home network (e.g. using a service like [canyouseeme.org](http://canyouseeme.org))?
>
> -
> 1. Does the public IP recognized by [canyouseeme.org](http://canyouseeme.org) match your router’s WAN IP (public IP) and the public IP listed on your PMS’s remote access settings?
1. I tried [canyouseeme.org](http://canyouseeme.org) and two other services: all of them didn`t see the fowarded port. I even tried some other ports just to… well for the sake of some hope. None of them worked.
2. Yes, the public IP recognized by [canyouseeme.org](http://canyouseeme.org) matches my public IP.
---
### Author:  [@tom80H](https://forums.plex.tv/u/tom80H)
#### Post date: [July 9, 2025, 6:58am UTC](https://forums.plex.tv/t/remote-access-unavailable/925398/5 "2025-07-09T06:58:03Z")
> [@ServerFCA](#):
>
> 1. I tried [canyouseeme.org](http://canyouseeme.org) and two other services: all of them didn`t see the fowarded port. I even tried some other ports just to… well for the sake of some hope. None of them worked.
While the result isn’t great, it’s good you already tested this on a wider scope. The different services should all see the same, but it’s helpful to verify if it’s just that specific port or others too (I usually recommend to test one totally random port in the range from 10000 to 50000, and one common one, like 80 or 8080).
As that’s not working and you don’t seem to be in a CGNAT situation (or having your router hidden behind more active network components — with the public IP matching across the different instances)… your best shot will be to contact your ISP and ask them if they’re blocking those ports, and more importantly if they’re willing/able to unblock one of them for you (doesn’t have to be 32400).
---
### Author:  [@ServerFCA](https://forums.plex.tv/u/ServerFCA)
#### Post date: [July 10, 2025, 8:43pm UTC](https://forums.plex.tv/t/remote-access-unavailable/925398/6 "2025-07-10T20:43:00Z")
I’ve tried many ports (almost 10). None of them worked.
But I just got to know that my ISP uses CGNAT. I contacted them but they won’t give me an exclusive public IP so in a couple of days I’ll have a new ISP.
Hoping it´ll work…
---
### Author:  [@ServerFCA](https://forums.plex.tv/u/ServerFCA)
#### Post date: [July 10, 2025, 8:44pm UTC](https://forums.plex.tv/t/remote-access-unavailable/925398/7 "2025-07-10T20:44:11Z")
No. It´s just the ISP router combo.
---
### Author:  [@tom80H](https://forums.plex.tv/u/tom80H)
#### Post date: [July 10, 2025, 10:42pm UTC](https://forums.plex.tv/t/remote-access-unavailable/925398/8 "2025-07-10T22:42:12Z")
3 posts were split to a new topic: [Remote Access issues](https://forums.plex.tv/t/remote-access-issues/925579)
---
### Author:  [@system](https://forums.plex.tv/u/system)
#### Post date: [October 8, 2025, 10:42pm UTC](https://forums.plex.tv/t/remote-access-unavailable/925398/9 "2025-10-08T22:42:55Z")
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.