Thank you for the reply Ned - sorry I should have looked at the release notes.
However, this is the relevant part of config.txt (after editing):
# Required overlay for LIRC to function
# dtoverlay=lirc-rpi
# Required for hyperion / lightberry
dtparam=spi=on
# Uncomment to enable the sdhost driver
# dtoverlay=sdhost
# Uncomment to enable HiFiBerry overlay
# NOTE: You must disable the lirc-rpi overlay (or change lirc GPIO pin) for HiFiBerry to work correctly
# dtoverlay=hifiberry-amp
dtoverlay=hifiberry-dacplus
# dtoverlay=hifiberry-digi
I have commented the second line, and uncommented the dtoverlay for the hifiberrydacplus
But I’m only getting HDMI, analog or optical/coax as an option in the audio output device.
I don’t remember optical/coax showing up on my other PPi2 - I will have to check when I get home from work.
Could optical/coax be the right setting, or should I definitely have an option for Hifiberry.
Thank you again.
Malcolm
