Server Version#: 1.41.4.9463 Web Player Version#: 4.143.0 MacOS Client Player Version#: 1.103.1.238-223cbba6 Hardware: CPU: Core Ultra 7 - 265K Motherboard: MAG Z890 TOMAHAWK WIFI (Updated to latest BIOS) Memory: 93GB Storage: SAS3 ZPool Setup OS: Debian Trixie (Updated to latest packages an…

DHCP reservations (which you show me here) have a duration. In your Unify settings, what is the DHCP address duration ? The default should be 86400 seconds. It can be set to longer periods if desired.

You mentioned WiFi when you shared the spec for your server. You showed wired performance stats. Of those stats from iperf, I am VERY concerned. 1011 retries ? My server’s iperf stats (entire network wired with static IP) [chuck@lizum media.2007]$ iperf3 -c 192.168.0.20 -R Connecting to host 1…

I’ll do some network troubleshooting tonight or tomorrow and report back. Thanks for the help so far.

So my laptop that I ran iperf from in the first post might of been on Wifi. But if I do a iperf between the old server and new server (both hardwired) there is no retries. ➜ ~ iperf3 -c 10.0.0.3 Connecting to host 10.0.0.3, port 5201 [ 5] local 10.0.0.4 port 51712 connected to 10.0.0.3 port 5201 …

I guess I need to figure out why this is happening… Feb 18, 2025 07:45:09.001 [140485858085688] DEBUG - NetworkInterface: received Netlink message len=68, type=RTM_NEWLINK, flags=0x0 Feb 18, 2025 07:45:09.001 [140485858085688] DEBUG - NetworkInterface: Netlink information message family=0, type=1, …

Ok found some reddit posts with people with similar issues for the network change stuff. Only thing people figured out was that it was related to Docker using Network Host mode. So I switched the container to Bridged and no more Network Change in the logs so far. I tried a movie out again and its s…

So I disabled Tone Mapping and it went from buffering every 30to60 seconds to maybe every 2 or 3 minutes…

[Screenshot 2025-02-18 at 8.57.45 AM] The above screenshot is one 4k Video transcoding to 1080p. It says Intel Meteorlake though not arrow lake, might be an issue with the intel-gpu-top software though.

I hope I’m not showing bias but Docker gives me hives. The native public package is always updated the same time docker image is. With native package, you have the freedom to use beta and revert easily I find docker to be “too much tinfoil”. Yes, it has its place — Use it when there is no na…

4K Quick Sync Transcoding Buffering - Core Ultra 265K

Plex Media Server

ChuckPa February 19, 2025, 2:42am 20

For reference, here’s what you can do

Topic		Replies	Views
Buffering with plenty of bandwidth available Plex Media Server server-linux	41	630	August 29, 2024
Plex Suddenly Stops Hardware Transcoding Plex Media Server server-linux , apple-tv , server-truenas	69	1016	September 20, 2023
Plex HW transcode randomly stops - Codecs: hardware transcoding: opening hw device failed - probably Plex Media Server server-docker	19	379	October 6, 2023
Constant buffering on all Plex devices since yesterday Plex Media Server server-linux , android-mobile-legacy , android-tv , player-windows	12	185	October 8, 2022
Hardware Transcoding issue (quicksync) in docker Plex Media Server server-linux , server-synology	25	460	September 27, 2023

4K Quick Sync Transcoding Buffering - Core Ultra 265K

Related topics