Server Version#: 1.29.2.6364 Player Version#: Hi im running Plex media server in docker on Openmediavault 6 which is Debian based os. this is my stack which I used to create the stack --- version: "2.1" services: plex: image: ghcr.io/linuxserver/plex container_name: plex-hw network…

Seems like the solution for me was to have clean install, make sure the PUID used for the plex is member of render (or creat user that is part of render) and also do this echo "options i915 enable_guc=2" >> /etc/modprobe.d/i915.conf update-initramfs -u and after not first reboot but second one the…

@anon18523487 could you take look at my log ? and see if you can point me in correct direction for solution? my HW transcoding refused to work

You should ask @jamesnorth what he did since he is using OMV6.

i am already on 5.16 which he state what made it work but i looked at his log he doesnt have the same error and i tried googling that error

These are the relevant lines in the logs: Dec 11, 2022 00:48:03.717 [0x7f04a5c7eb38] ERROR - [Req#15d/Transcode/wt247dz3rjrqpeo54ytg8er6/90552a5d-78d6-4dae-b5fc-a50e99456eb7] [h264_vaapi @ 0x7f2dad86adc0] Driver does not support any RC mode compatible with selected options (supported modes: CQP). D…

root@homeserver:/sys/module/i915/drivers# sudo dmesg | grep -i i915 [ 3.862894] i915 0000:00:02.0: [drm] VT-d active for gfx access [ 3.862905] i915 0000:00:02.0: vgaarb: deactivate vga console [ 3.862983] i915 0000:00:02.0: [drm] Transparent Hugepage mode 'huge=within_size' [ 3.878672] …

Hmm… Have you enabled GuC per this support topic (point 2)? [image] Linux Tips Tips, Tricks & How-Tos Transcoding and tone mapping with JasperLake / ElkhartLake CPUs This tip / How-To is entirely NOT-SUPPORTED by Plex. You, as the system’s owner/admin assume…

Linux Tips Replace inte-media-va-driver with intel-media-va-driver-non-free how do I do this part?

sudo apt install intel-media-va-driver-non-free But, the second point is the more important. That is, enable GuC.

[image] pshanew: sudo apt install intel-media-va-driver-non-free i think i need repo for that because im getting this root@homeserver:/# sudo apt install intel-media-va-driver-non-free Reading package lists... Done Building dependency tree... Done Reading state information... Done Package i…

Skip that for now. As I said, the second part is the more important. Enable the GuC.

iGPU HW Transcoding not working N6000

Plex Media Server

pshanew December 12, 2022, 5:48pm 14

Hmm… Have you enabled GuC per this support topic (point 2)?

Topic		Replies	Views
Hardware Transcoding Problems: Jasper Lake (N5105) + Docker + OMV 6 (Debian 11) Plex Media Server server-linux , server-docker	7	211	October 30, 2022
Can Jasper Lake N6005 use hardware transcoding? Plex Media Server server-linux	84	8223	January 17, 2023
Plex Media Server hardware transcoding not working ubuntu 24.04 Plex Media Server server-linux	25	1184	February 11, 2025
Ubuntu Intel N5105 QSV HW Transcoder not detected Plex Media Server server-linux	143	5647	December 9, 2023
Hardware transcoding not working in docker Plex Media Server server-linux , server-docker	36	888	January 6, 2023

iGPU HW Transcoding not working N6000

Related topics