I see there's a card (Trello) for GPIO IR support under "Planned Features". But, I'm wondering if there's any timeline (estimated of course) that I could look forward to this being implemented. Thanks!

I was incredibly frustrated that the Menu button would take you all the way to the main menu, so I did some digging and found this: If you change it to say KEY_BACK in the /storage/.config/lircd.conf and KEY_BACK in the /storage/.plexht/userdata/lircmap.xml it will take you back, as opposed to the…

If this is any help... :ph34r: I am really interested in doing this and was digging up some information. http://www.youtube.com/watch?v=QV_QmDKx0kQ http://learn.adafruit.com/using-an-ir-remote-with-a-raspberry-pi-media-center

hello, i am having lots of trouble getting my gpio ir receiver to work. i have followed the wiki and seem to have the pieces in place, but no joy ... i am using an apple remote a1294. while looking around i have found lircd.conf files for this remote for a variety of drivers : mac mini, serial, ..…

Hi, I also have the same problem than scott, I also tried this all yesterday, following the wiki, but it's not working. The only difference is that I don't use a wireless keyboard, but I also control via cec. Thanks

hello again, i gave up on making the apple remote and moved to using an ir-blaster that emulates an apple remote (my target configuration). i got a mostly working lircd.conf file by using the irrecord. fafoulon, have you tried this ? i ran into some new issues. for one, my ir-blaster does not emul…

good evening, lircd.conf is as follows if that could help. - scott # Please make this file available to others # by sending it to # # this config file was automatically generated # using lirc-0.9.1-git(default) on Mon Aug 5 19:23:11 2013 # # contributed by # # brand: bang & olufsen # model no.…

reply to self, i have made some progress ... (mostly) fixed repeat problem by adding "min_repeat 0" *after* gap in lircd.conf. irw shows that there is only one 'up' for each press. however, rasplex still shows strange behavior sporadically acting as if the button in question had been repeated tw…

hey guys - here's my setup: - rasplex 3.1 - GPIO reciever - harmony remote (emulating windows MCE remote) this IR remote setup works OOB which makes my life really easy. there's only one issue I have: after an extended period of non-use, it takes 5+ minutes for the remote to start working a…

No one else with the unresponsive issue? I’ve run irw to check for commands and it does seem like lirc is receiving the commands when it’s unresponsive Sent from my Nexus 4 using Tapatalk

Support for GPIO IR Receivers

Dev Community Apps & Creations

system Closed December 20, 2019, 11:02pm 51

This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.

Topic		Replies	Views
RasPlex & Raspberry Pi with RemotePi Board - How to config remote? Apps & Creations	20	1162	January 8, 2020
Editing LIRC commands? Apps & Creations	17	629	January 8, 2020
Lircmap.xml changes in 1.7.1? Apps & Creations	19	506	January 8, 2020
CEC remote keys mapping Apps & Creations	22	961	December 21, 2019
Harmony Touch remote and the RemotePi Board. Apps & Creations	18	263	January 8, 2020

Support for GPIO IR Receivers

Related topics