Hi there
I’ve just tried to do a fresh installation on a new class 10 SD card - unfortunately I can’t get it to boot. It gives the following error:
*** error in mount_storage: mount_common: Could not mount /dev/mmcblk0p2 ***
Anyone able to give a few hints on how to fix this?
Sent from my iPhone using Tapatalk
Hi there
I've just tried to do a fresh installation on a new class 10 SD card - unfortunately I can't get it to boot. It gives the following error:
*** error in mount_storage: mount_common: Could not mount /dev/mmcblk0p2 ***
Anyone able to give a few hints on how to fix this?
Sent from my iPhone using Tapatalk
Looks like the flash didn't work, suggest reflashing, make sure you eject the SD card before removing.
Regards
@jack0w:
You need to provide more information on how you did this new installation, in order for anyone to conclude what went wrong.
Otherwise all we can do is to iterate a long list of everything that has gone wrong for people installing in the past.
Obvious things to try include:
Use different flashing hardware (other card reader/writer and/or other computer)
Use different flashing software (RasPlex installer VS 'Win32 Disk Imager" or Linux ‘dd’ comand methods)
Use a different SD card (always Class10 quality, recommended sizes 4GB and up)
The error message you got indicates a failed partition mount procedure, so it may have been caused by a remnant partition table from previous use of that card for other purposes, though a properly working flash procedure should have removed any old partition info.
@Ned:
Apparently you got in while I was typing. But it doesn’t make any difference as we both agree that a new flashing, with possible variations in how it’s done, is how jack0w needs to proceed.
Best regards: dlanor
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.
