pcorpe
June 15, 2013, 5:08pm
1
ATV3 5.2.1
ATV DNS set to 192.168.2.26
PlexConnect installed on MacMini 10.8.4 (IP:192.168.2.6)
The device and operating system (including version number) that PlexConnect is installed on:
PMS installed on above mac, OSX10.8.4 (IP:192.168.2.26)
Media is on NAS (PMS via other clients)
PlexConnect downloaded from Github today approx 17:00
settings.cfg file reads
[PlexConnect]
port_pms = 32400
enable_plexgdm = True
ip_dnsmaster = 8.8.8.8
ip_webserver = 0.0.0.0
loglevel = Normal
enable_dnsserver = True
ip_pms = 192.168.2.26
port_webserver = 80
firewall is turned off (temp)
enable_plexgdm seems to fail, even though there are 2 PMS servers on the network
IP_self shows 10.5.2.66 which seems way wrong, but i don't figure where this is coming from?
IP of ATV is 192.168.2.25
error i'm getting is Trailers are unavailable etc...
i think i need to figure why IP_self is wrong, any ideas?
Trudge
June 15, 2013, 5:19pm
2
ATV3 5.2.1
ATV DNS set to 192.168.2.26
PlexConnect installed on MacMini 10.8.4 (IP:192.168.2.6)
The device and operating system (including version number) that PlexConnect is installed on:
PMS installed on above mac, OSX10.8.4 (IP:192.168.2.26)
Media is on NAS (PMS via other clients)
PlexConnect downloaded from Github today approx 17:00
settings.cfg file reads
[PlexConnect]
port_pms = 32400
enable_plexgdm = True
ip_dnsmaster = 8.8.8.8
ip_webserver = 0.0.0.0
loglevel = Normal
enable_dnsserver = True
ip_pms = 192.168.2.26
port_webserver = 80
firewall is turned off (temp)
enable_plexgdm seems to fail, even though there are 2 PMS servers on the network
IP_self shows 10.5.2.66 which seems way wrong, but i don't figure where this is coming from?
IP of ATV is 192.168.2.25
error i'm getting is Trailers are unavailable etc...
i think i need to figure why IP_self is wrong, any ideas?
You ATV DNS needs to be set to the machine running PlexConnect.
And there is no log file attached.
pcorpe
June 15, 2013, 5:30pm
3
Hi Trudge,
thanks for the help, yup, the ATV DNS is set to the machine running PlexConnect (192.168.2.26)
log file... humm had it listed when posting, but gone...
pasted here http://pastebin.com/s1LxGAY1
pcorpe
June 16, 2013, 2:53pm
4
Hi All,
so after trying to fix this doing all the normal complex stuff I've rebooted both the switch (24pt prosafe smart Gigabit switch) and the router (draytek 3200)
and now the self_ip correctly identifies itself, and all works fine even the enable_plexgdm, thus not needing to manually set the pms ip.
all good, works a treat thanks all.