ATV3 Plexconnect sees PMS but no library

[wookert]

• Your ATV model (2 or 3) and firmware version (found under the ATV settings > general > about > Apple TV software): ATV3 5.3(6105)

• The DNS server set on the ATV (found under the ATV settings > general > network > DNS):10.0.2.3

• The local IP address of the device that PlexConnect is installed on: 10.0.2.3

• The device and operating system (including version number) that PlexConnect is installed on: OSX Server 10.7.5

• The device and operating system (including version number) that the Plex media server (PMS) is installed on: OSX Server 10.7.5

• The Plex media server (PMS) version number you are running (do not put 'latest'):0.9.8.18

• The local IP address of the device that the Plex media server (PMS) is installed on:10.0.2.3

• The PlexConnect version number. 0.3.1+

• The contents of your 'Settings.cfg' file (this is created at first clean shutdown of PlexConnect, using CTR+c)

[PlexConnect]

port_pms = 32400

port_webserver = 80

ip_plexconnect = 0.0.0.0

certfile = ./assets/certificates/trailers.pem

ip_dnsmaster = 8.8.8.8

loglevel = High

enable_dnsserver = True

logpath = .

ip_pms = 192.168.178.10

enable_plexgdm = True

port_ssl = 443

enable_webserver_ssl = True

ip_webserver = 0.0.0.0

prevent_atv_update = True

port_dnsserver = 53

enable_plexconnect_autodetect = True

hosttointercept = trailers.apple.com

• A detailed description of the issue (the clearer you can make this the better):

PlexConnect on ATV3 sees server in Settings>Discover>Plex Media Servers:1. But under Library> PlexConnect No Plex Library Sections Available. 

System was working flawlessly (6 months) until OSX server had to be reset.

[baa]

PMS set to "require authentication"?

PMS set to different port?

[wookert]

Thanks for the quick response Baa.

Where do I check those settings?

[wookert]

Baa! thank you so much.

Authentication on local networks was enabled in PMS settings.

Genius!