Server Version#: 4.87.2 Player Version#: 1.61.1.3432-3929cb60 I’ve been struggling with this issue for months and I can’t seem to find a solution. I have my server set up with a couple of large storage HDDS. I’ve tried to set up remote access several times in several different ways and there’s no …

I little update on this. As I was told and after testing it myself, remote access only works in bridge mode if I connect my PC which is also my server to the only working LAN port that’s left after enabling bridge mode in my router. It doesn’t work if I connect my actual router to the ISP modem. So…

Can you verify if your ISP is providing a routable IPv4 address to your router? Many ISPs only assign private IP addresses which aren’t accessible from the outside, e.g. in a CGNAT configuration. Generally it’ll be important to be clear about your internet access and home network setup. The more …

Thank you for replying @tom80H , I tried to read the article you attached to your response. For me it’s quite difficult to understand to be honest. I’m not sure how to check if I have a routable IPv4. I assigned a static IP address to my pc following the indications here , and then went into my router…

[image] jay_em2323_gmail_com: I’m not sure how to check if I have a routable IPv4. Your router should have some information on its public or WAN IP address. This should e.g. not be a private network IP address. [image] jay_em2323_gmail_com: I change that to 32400 and it says it can’t s…

I had the chance to test the Bridge mode in my router, and it actually works. In my ISP modem, under the LAN section there’s an option called “NAT mode”, and there are 3 choices: -RoutedwithNat (This is the default one) -Bridged -RoutedwithoutNat So when I change to bridged mode, it disables all…

not sure about their model. keep in mind that bridge mode basically means you no longer establish a network of your own (= your personal home network) but are part of the ISP’s overall network instead. I don’t think that’s desirable. when you hear people discussing bridge mode it’s usually becaus…

Yeah, it doesn’t sound good. Well, I guess remote access is a no go for me then. I have no idea what I’m doing or how to do it, so I’ll just leave it as it. Thank you for your help @tom80H

[image] tom80H: As for the remote access status indicator… that initial “green” status can be quite misleading. Basically Plex will show a green status while it’s attempting to verify the actual remote access status. So even if your setup isn’t working, it’ll initially show as “green” for a few …

have a look in this thread. Media-Server Remote Access - "Not available outside of your network" - #72 by FordGuy61 sorted it out for some of us. (even got pictures)

You are using terms that don’t make sense and haven’t explain your topography yet so it’s difficult to help. You refer to your isp modem and changing to bride but a modem is not a router and there are no such options on a modem. If you are referring to an ISP provided modem/router combo then it woul…

I call it a modem because I don’t know if it is just a modem or a modem/routed provided by my ISP. “You are using terms that don’t make sense”, of course I am, I don’t know what any of this means, I’m not tech savvy at all. I tried to go into Fiverr to see if anybody could help me out with this set…

I'm giving up on this remote access feature completely

Plex Media Server Remote Access

Topic		Replies	Views
Media-Server Remote Access - "Not available outside of your network" Remote Access server-windows	98	2243	December 25, 2022
Remote Access has stopped working - only change is Plex Server Updates Remote Access server-windows	44	1037	August 16, 2023
Remote Access won't stay enabled Remote Access server-windows	7	246	November 17, 2022
Remote Access not allowed? Remote Access	67	1612	March 9, 2020
Remote Access keeps going red Remote Access server-mac	29	697	August 13, 2025

I'm giving up on this remote access feature completely

Related topics