Server Version#: 1.18.9.2578 Player Version#: 1.18.9.2578 Hi there, my server PERMANENTLY says it is unavailable, I tell it to enable remote access, it flashes that it worked, then within a 2 seconds it disables it. OR so it seems, however despite it saying that it has disabled it, half the time…

Server Version#: 1.18.9.2578 My experience has been identical to that described by @Specimen1334 , with the following exception. In Network Settings I have enabled the relay function so users outside my network are still able to reach my NAS and share my content. [Plex Network Settings Relay] Ba…

I have noticed this same issue for the past one or two weeks, never noticed it before but on the other hand I was not really paying any attention to it. I tried several of the suggestions I found on the related help pages but to no avail, remote access remained mostly unavailable. When I disabled U…

This is an issue that has been plaguing a lot of users within the last few weeks. I suspect it to be an issue on Plex’s end. A good way to test would be to use the Open Port Check Tool on the YouGetSignal website. If it says your incoming port is closed, then it’s an error on your end.

For the sake of completeness, adding link to my reply in another thread. [image] Remote access failure Remote Access @Chritipa , Thanks for providing this info. I just checked my server to confirm that the port forwarding is working as expected. It appears t…

Also seeing this, Server indicates not available outside the network, however remote users can still access server. just fine from differing types of clients. Just a status thing?

I just tried @ChuckPa ’s solution, which is found in another thread. At first, it didn’t appear to work, but, after a few minutes, my server is now showing that Remote Access is available. It’s worth checking out. [image] Server says accessible, but remote device says it's offline …

Hey @ChuckPa is there a version of this method for QNAP? I would expect it would involve a bit of SSH?

Thanks @Chritipa for the suggestion. I have done this and confirmed my port is infact open. Which I expected to be the case, as people are able to acces my content from time to time. I believe that your assessment that it is on their (plex’s) end is accurate. I hope they fix this issue fairly soo…

This can be done on QNAP without SSH. It requires two packages be installed. QNAP “Text Editor” (from the QNAP store) PMSLibShare https://github.com/ukdtom/PMSLibShare/releases IMPORTANT: This is a forced “Reclaim” of the server. Following my Synology procedure, but adapting for the diffe…

Hi there, My apologies, I have absolutely no idea how to install or find Qnap text editor, I googled for it and get taken to a website https://appcenter.qnap.com/eng/qpkg/overview/TextEditor . However there is no way to download it from that, unless I have blindly be staring at this page for the pa…

Remote Access Constantly Appears To Disable

Plex Media Server Remote Access

pguest099 April 1, 2020, 4:28am 5

For the sake of completeness, adding link to my reply in another thread.

Topic		Replies	Views
Remote Access shuts off General Discussions	72	203	January 16, 2017
Remote Access Disconnecting after 4 seconds Remote Access server-windows	40	2864	October 2, 2019
Remote server problems Remote Access server-windows	40	1105	October 18, 2021
Suddenly Remote access isn't working - Outside network appears and then fails Remote Access server-windows	91	6090	May 5, 2020
Remote Access doesn't work after last update Remote Access server-windows	48	1073	May 26, 2022

Remote Access Constantly Appears To Disable

Related topics