Server Version#: 1.32.4.7195 Hi there, yesterday, my PlexMediaServer suddenly was not available from the outside anymore. But that´s not all, I also cańt connext via any app (iPhone, iPad, AppleTV). I changed nothing on my network, it just stopped beeing available. I also can’t define a manual Ser…

I‘ve done it as you told me. Completely turned off remote and after 1 hour I enabled it again and set the port to an another one as 32400. I don‘t know which part exactly, but it worked! Now remote access works as good as before. Thanks so much for your help. Have a nice evening.

@ChuckPa Can the IP block please be lifted?

@maartenvangrinsven it was only a short block (1 hr). already long since expired

@ChuckPa Ah thanks for the update. However, I’m still unable to create a direct connection. What can I do to fix this?

Look at what it’s telling you … The certificate is not valid. (the red box) If that is your FQDN, then what do the PMS logs tell you as it starts up? Does your P12/PFX file contain Cert. Key, and CA ?

Hi all! Having same problem…everything was working and now i can’t remote access plex server. Plex is showing that everything is fine…restarted router/docker - noting changed. I’m running plex in docker container on unraid. Thank You [plex]

I looked up your IP and port from Plex.tv and attempted to connect [chuck@lizum tv.2032]$ netcat -vvvv XXX.XXX.XXX.x5 32400 Connection to XXX.XXX.XXX.X5 32400 port [tcp/*] succeeded! I believe it is best to: VERIFY debug logging is enabled (SAVE if changes) Restart PMS Wait 3 minutes (for Plex…

Plex.tv confirms the server is reachable. (1 = reachable, 0 = not reachable) [EventSourceClient/pubsub/192.46.236.7:443] PubSub: Got notified of reachability for async identifier e84a41c0-d6ab-4067-86e6-1074f75c674b: 1 for XXX.XXX.XXX.X5:32400 (responded in 49 ms) According to the logs, There…

Tried force stop and clear cache on the app…Nothing…It works fine while i’m on the same network as plex server but as soon as I go on mobile server disappears

Plex.tv comes through your WAN IP address (modem/router + port forwarding + firewall ) If Plex.tv can reach your server (the WAN IP:port) then so should the app … because plex.tv gave it that same IP:port) Sending you a PM of what Plex.tv sees.

Suddenly no remote access

Plex Media Server Remote Access

Topic		Replies	Views
Some remote access stopped working Remote Access server-linux	391	3959	December 5, 2020
Remote access not working after resetting password Remote Access server-windows , plex-web	97	1306	September 6, 2022
Can't enable Remote Access Remote Access server-linux	66	1337	October 12, 2020
Remote Access only Fully accessible for about 10 seconds Remote Access server-windows	32	798	September 23, 2024
Remote access failure Remote Access server-windows , android-mobile-legacy	76	5861	April 20, 2020

Suddenly no remote access

Related topics