Server Version#: 1.18.7.2438 Player Version#: Web No matter what settings i use, my outside access will show enabled and all green for a very short time, then go red suddenly. whether i use the automatic port or manual port it seems to go stable then drop after a short period. It’s been working…

i have same issue but its been 4 days now i even call my cable company to make sure my ports were open an on there end all is good but on plexs end enable outside 15 sec later disabled outside server?

Does anyone have an suggestions for a possibly solution…I have the exact same issue.

Yeah. I just noticed that happening in my install too. Was wondering if something changed (like my dynamic external IP address) that I needed to adjust in the Plex Server settings but i couldn’t see anything.

Perhaps [FIOS] Internet Connected but no access to Internet while PMS is running

[image] leatherlips: No matter what settings i use, my outside access will show enabled and all green for a very short time, then go red suddenly. whether i use the automatic port or manual port it seems to go stable then drop after a short period. It’s been working fine for YEARS, but now it sc…

@OttoKerner Is this problem a lot of us are now experiencing being looked into by the plex team? Or has remote access been turned off to all users now?

There is nothing that can be done on the side of plex.tv Authentication servers are all up and working normally https://status.plex.tv/ Did you follow the link I set above? If your ISP has integrated the McAfee security software in their systems, you need to disable it or wait until they have upd…

For some of you, the issue might be connected to this one: [image] Plex keeps becoming UNREACHABLE Desktops & Laptops I can see the issue that has just started to get reported by users after 1.18.7 went out. It is a lockout after an error to load an iTunes library into Pl…

I have likewise been having this problem (Remote access “Not available outside your network”) but only since installing the latest version of Plex Media Server (1.18.7.2438). Remote access on my Plex server had been working without any problems for months before I installed that latest update. I d…

I have the same issue. I’ve tried all the suggestions I’ve found online with no success.

Suddenly Remote access isn't working - Outside network appears and then fails

Plex Media Server Remote Access

Topic		Replies	Views
Remote Access - Says its working, but it isnt Plex Media Server server-windows	98	4543	March 21, 2019
Remote access failure Remote Access server-windows , android-mobile-legacy	77	5800	June 25, 2020
Remote access "not available outside your network" General Discussions server-windows	32	18657	February 20, 2019
Remote Access shuts off General Discussions	73	167	January 7, 2020
Remote server problems Remote Access server-windows	42	1064	January 16, 2022

Suddenly Remote access isn't working - Outside network appears and then fails

Related topics