Installed the latest build (.24) and then manually set a static IP address and the address to the PMS, and it resolved the network flooding issue. Things are still pretty sluggish, and videos don't play, though.
I'll wait for the next build, and give you updates when I get that rolling!
Videos should play, at least most of them. I has a similar issue at first boot once.
did you try rebooting the pi ?
Not sure if it's just my set up or some features that have yet to be added:
Cannot get the PLEX iOS app to see RasPlex, are there any settings I need to change?
RasPlex doesn't load and fanart for watched TV Programs and Movies, only adding unwatched items?
Any Music (FLAC) and Video Channels (example: Giant Bomb) display a error when trying to play?
Any assistance would be greatly appreciated :)
Otherwise keep up the good work!!
Plex IOS app should see the PI. did you login with myplex ?
There are some remoting issues still with IOS app, but it should see the pi without any specific settings
FLAC music should play.
Video channels are not yet operationnal.
Videos should play, at least most of them. I has a similar issue at first boot once.
did you try rebooting the pi ?
What would be the preferred way of rebooting the Pi/Rasplex? So far I've been trying to do it with a 'reboot' command but haven't had any success :(
Steps:
- RPi is connected to the network via WiFi
- log in to Rasplex via ssh
- 'su' to become root
- 'Reboot'
- Then the ssh client just kind of hangs and I cannot reconnect to the RPi
- This causes me to disconnect the power supply, but as you can imagine: this corrupts the SD card and I have to reinstall/-configure all over again
I've been using Openlec on my daughters old crt tv in her room not the best picture but its ok for her. I put rasplex on the SD card but there is nothing on the screen, I can see rasplex has started because it shows on plex on iphone when I press the tv icon at the bottom (players) plexhometheater on raspberry is showing . Is Rasplex set up for hdmi output only and if so is there a way I can get it to composit.
Installed the latest build (.24) and then manually set a static IP address and the address to the PMS, and it resolved the network flooding issue. Things are still pretty sluggish, and videos don't play, though.
I'll wait for the next build, and give you updates when I get that rolling!
No videos play? Are you trying to play through the fanouts, or did you navigate to through the TV shows /movies area?
The UI is known to be a bit sluggish, but all of my playback tests have worked.
Did you try forcing local transcode?
Not sure if it's just my set up or some features that have yet to be added:
Cannot get the PLEX iOS app to see RasPlex, are there any settings I need to change?
RasPlex doesn't load and fanart for watched TV Programs and Movies, only adding unwatched items?
Any Music (FLAC) and Video Channels (example: Giant Bomb) display a error when trying to play?
Any assistance would be greatly appreciated :)
Otherwise keep up the good work!!
Video channels are known not to work. I need help from Plex Inc to get it working. Very few of them work (crackle works for some reason). Most don't.
Not to worry I sorted it by adding the line sdtv_mode=2 in the config :)
No videos play? Are you trying to play through the fanouts, or did you navigate to through the TV shows /movies area?
The UI is known to be a bit sluggish, but all of my playback tests have worked.
Did you try forcing local transcode?
No videos play. I tried playing from the fanouts, by navigating direct to the movies area, and by initiating the play function from the iOS app. None of them worked.
I have tried rebooting, but have not tried forcing local transcode. Is there a setting for this somewhere?
No videos play. I tried playing from the fanouts, by navigating direct to the movies area, and by initiating the play function from the iOS app. None of them worked.
I have tried rebooting, but have not tried forcing local transcode. Is there a setting for this somewhere?
its in the network setting
No luck for me with 1.25.
It still freezes after a few seconds (if it's connected to network or not). See picture.
Have tried with two different monitors, two different hdmi cables, 3 different SD cards, two different power adapters.
I have not tried with more than 1 USB keyboard, and I have not changed the RPi. Faulty RPi HW?
No luck for me with 1.25.
It still freezes after a few seconds (if it's connected to network or not). See picture.
Have tried with two different monitors, two different hdmi cables, 3 different SD cards, two different power adapters.
I have not tried with more than 1 USB keyboard, and I have not changed the RPi. Faulty RPi HW?
I've seen this before, it might be related to overclocking... not sure though.
Are your SD Cards SDHC 10?
Plex IOS app should see the PI. did you login with myplex ?
There are some remoting issues still with IOS app, but it should see the pi without any specific settings
FLAC music should play.
Video channels are not yet operationnal.
Video channels are known not to work. I need help from Plex Inc to get it working. Very few of them work (crackle works for some reason). Most don't.
Thanks LongChair and dale.
Not sure what the problem is then as I cannot for life of me get the iOS app to see RasPlex? I'm logged into myPlex and the XBMC iOS App works? Also on the PLEX iOS App I can see the Pi as a AirPlay server?
Also FLAC doesn't work at all?
I've seen this before, it might be related to overclocking... not sure though.
Are your SD Cards SDHC 10?
Yes. The two cards I have tried with 1.25 is both 16 GB class 10. One of them is a fast card (45 MB/s); Win32 Disk Imager writes the image 3 times faster on this one.
What is the correct settings in config.txt for no overclocking?
Yes. The two cards I have tried with 1.25 is both 16 GB class 10. One of them is a fast card (45 MB/s); Win32 Disk Imager writes the image 3 times faster on this one.
What is the correct settings in config.txt for no overclocking?
Found the no overclocking settings in config.txt. Edited config.txt, and it looks promising. will let it stay on overnight.
Found the no overclocking settings in config.txt. Edited config.txt, and it looks promising. will let it stay on overnight.
Can you post your config.txt settings if they worked for you?
Can you post your config.txt settings if they worked for you?
Edited these:
Was wondering does it matter if is 256MB version or 512MB version of Pi?
Was wondering does it matter if is 256MB version or 512MB version of Pi?
512 is guaranteed to have less problems for now. 256 we want to support, but might run into more memory constrained problems.
Hey I just installed the new Bleeding Edge 1.25 and wanted to let you know that when you choose shutdown, that it doesn't in fact shutdown but go back to the loading screen. Seems the only way to power down is to pull the plug, and I really don't want to corrupt the SD card. Anyone else get this problem too?
