Today i upgraded my old verizon fios router to the newest fios router. before this, remote access was working. after the upgrade remote access is not working properly, and all connections are indirect. ive searched and cant figure anything out, my upnp is enabled in the router as well. i have a…

You might want to review your router configuration first (as that’s the component you changed). [image] The Basics of Remote Access Troubleshooting Tips, Tricks & How-Tos When it comes to remote access, there’s a lot of different factors which can impact your …

i have, a couple times and as far as i can tell, everything seems to be the same

I suggest you try dropping UPnP and go with a manual port forward. Was there any change in your data plan when you got the new router? Did you verify the router has a publicly accessible/routable IPv4 address? If you setup a manual port forward… can you access the public port on your router’s WAN…

there was no change in anything, just a router upgrade. i have managed to get remote access working, but all connections are coming up as indirect. im not sure if it has a public accessible address, i have an option to do a dmz host and make a public address, is that what i should do?

[image] john914: there was no change in anything, just a router upgrade You changed the device that controls remote access to your server. [image] john914: i have managed to get remote access working, but all connections are coming up as indirect. Indirect connections use Plex Relay . …

there was no change in anything

its all green, fully accessible, but my server says indirect [router]

Thanks for the screenshot. From the PC running Plex Media Server, or another system on the same network, go to https://canyouseeme.org/ . “Your IP” should be the same as the public IP address displayed on the Remote Access settings page. If it is not, then something is wrong. Instead of port 80, …

hey ok so i went to the site, the ip is the same, i switched 80 to match the 32400 and clicked check port, and got Error: I could not see your service on myipnumber on port (32400 ) Reason: Connection timed out

sorry, i goofed up, i put the proper port # this time, not the 32400, and it’s telling me Success: I can see your service on myipnumber on port (portnumber ) Your ISP is not blocking port

Updated router today, lost remote access, and all connects indirect now

Plex Media Server Remote Access

tom80H August 10, 2022, 12:00am 2

You might want to review your router configuration first (as that’s the component you changed).

Topic		Replies	Views
Remote Access Issue Remote Access server-windows	8	250	June 3, 2024
HELP! Can only connect indirectly Remote Access server-windows	8	612	July 12, 2020
Remote Access Not working Remote Access server-windows	7	461	March 1, 2020
Connection showing "indirect" Plex Media Server server-linux	3	187	January 23, 2022
New ISP, New Router, Remote access is indirect connection...need help configuring Plex Media Server server-windows	9	181	November 30, 2022

Updated router today, lost remote access, and all connects indirect now

Related topics